Catalog
Commercial Doors
premium Aluminum full view
8000 / 8100 / 8400 /8500
Finish
Aluminum parts are clear anodized, bronze anodized or white powder coated. Powder coated in custom colours available.
WEATHERSTRIP
Bottom rail has a replaceable U type bottom astragal. Optional weather-stripping is available for header and jambs.
Lock
Interior mounted slide lock.
Operation
Manual push up, chain hoist, or electric motor.
WIND LOAD
Consult factory for available wind load rated options.
Available Widths
- 21'
- 24'
Available Heights
- 9'2"
- 9'3" to 12'2"
- 12'3" to 17'2"
- 17'3" to 18'2'
- 18'3' to 20'2"
8000 CONSTRUCTION
STANDARD FEATURES
DOOR SECTIONS: Door sections are 2″ thick. They consist of extruded aluminum rails and stiles assembled with 5/16″ threaded rods and nuts. Glazing is sealed on all four sides and retained on all four sides with extruded aluminum snap-in beads. The end stiles width: 3 3/8″. Center stiles width: 2 3/4″. Top rail height: 7/8″ or 4 1/4″ depending on door size. Bottom rail height: 2 7/8″, 4 1/4″ or 7 1/4″ depending on door size and weight. Combined meeting rails height: 2 1/2″. Lower meeting rail has an integral reinforcing fin on doors over 12′ 2″ wide (Model 8100) or over 10′ 2″ wide (Models 8400 and 8500).
GLAZING: Sections can be glazed with 1/8″ glass or acrylic (Model 8100), 1/4″ glass (Model 8400), or 1/2″ insulated glass (Model 8500). Many glazing options are available including tempered glass, tinted glass, low E glass, or laminated safety glass. 0.062″ anodized aluminum panels can be used in any section.
TRACK: Track system is 2″ or 3″ depending on door size and weight, galvanized, and can be angle or bracket mounted as required. Optional track configurations include vertical lift, low headroom, high lift and follow the roof pitch.
HARDWARE: Brackets and hinges are made from galvanized steel. Rollers have (10) 1/4″ steel ball bearings in case hardened races.
SPRING COUNTERBALANCE: We use oil tempered helical wound and stress relieved torsion springs mounted on a cross header shaft, supported by bearing brackets. Springs are calculated for 10,000 door cycles. 25K, 50K, or 100K cycles are optional. Cables are galvanized aircraft quality with a minimum 7 to 1 safety factor.
Premium Commercial Doors
6500
Industrial Insulated Doors
Available Colors
Finish
1.0 mil paint system includes .25 mil rust inhibiting primer and .75 mil top coat that resists fading and chalking while providing consistent color from panel to panel. Standard color is white. Brown optional.
WEATHERSTRIP
Bottom section has a replaceable U type bottom astragal retained by an extruded aluminum retainer. Optional jambs and header weather-stripping is available.
Lock
Lock is interior mounted slide lock.
Operation
Operation to be manual push up, chain hoist, or electric motor.
WIND LOAD
Consult factory for available wind load rated options.
Windows Options
Available Widths
- 21'
- 24'
Available Heights
- 9'2"
- 9'3" to 12'2"
- 12'3" to 17'2"
- 17'3" to 18'2'
- 18'3' to 24'2"
- 24'3" to 26'2"
6500 CONSTRUCTION
STANDARD FEATURES
DOOR SECTIONS: 2″ thick door sections are manufactured using an exterior pebble grain embossed nominal 24 gauge steel panel and a 26 gauge steel interior panel with polystyrene insulation pressure bonded to both panels – and have tongue and groove meeting rails. Exterior panels are formed with four small grooves. End caps are made from 20 gauge galvanized steel. 20 steel interior hinge plates are provided for hardware attachment. Plates extend to full height of the section. Rvalue of polystyrene core is 10.25.
GLAZING: 24″ x 8″ or 24″ x 12″ windows glazed with insulated glass are available. Optional Series 8000 Full View sections can be substituted for steel sections.
TRACK: Galvanized track system is 2″ or 3″ based on door size and weight. Can be bracket or angle mounted as required. Optional track configurations include vertical lift, high lift, low headroom, and follow the roof pitch.
HARDWARE: Brackets and hinges are made from galvanized steel. Commercial duty rollers are standard.
SPRING COUNTERBALANCE: We use oil tempered helical wound and stress relieved torsion springs mounted on a cross header shaft supported by bearing brackets. Springs are calculated for 10,000 door cycles. 25K, 50K. or 100K cycles are optional. Cables are galvanized aircraft quality with a minimum 7 to 1 safety factor.
Premium Commercial Doors
4400 / 4401
Industrial Insulated Doors
Available Colors
Finish
1.0 mil paint system includes .25 mil rust inhibiting primer and .75 mil top coat that resists fading and chalking while providing consistent color from panel to panel. Standard color is white. Brown optional.
WEATHERSTRIP
Bottom section has a replaceable U type bottom astragal retained by an extruded aluminum retainer. Optional jambs and header weather-stripping is available.
Lock
Lock is interior mounted slide lock.
Operation
Operation to be manual push up, chain hoist, or electric motor.
WIND LOAD
Consult factory for available wind load rated options.
Available Widths
- 21'
- 24'
Available Heights
- 9'2"
- 9'3" to 12'2"
- 12'3" to 17'2"
- 17'3" to 18'2'
- 18'3' to 24'2"
- 24'3" to 26'2"
4400 CONSTRUCTION
STANDARD FEATURES
DOOR SECTIONS: Door sections have a 2″ thickness and are manufactured using an exterior pebble grain embossed nominal 24 gauge steel panel and a 26 gauge steel interior panel with polystyrene insulation pressure bonded to both panels. Sections have tongue and groove meeting rails. Exterior panels are formed with four small grooves. End caps are 20 gauge galvanized steel. 20 steel interior hinge plates are provided for hardware attachment. Plates extend to full height of the section. Rvalue of polystyrene core is 10.25.
GLAZING: 24″ x 8″ or 24″ x 12″ windows glazed with insulated glass are available. Optional Series 8000 Full View sections can be substituted for steel sections.
TRACK: Galvanized track system is 2″ or 3″ depending on door size and weight and can be bracket or angle mounted as required. Optional track configurations include vertical lift, high lift, low headroom, and follow the roof pitch.
HARDWARE: Brackets and hinges are made from galvanized steel. Commercial duty rollers are standard.
SPRING COUNTERBALANCE: Our springs are oil tempered helical wound and stress relieved torsion springs mounted on a cross header shaft supported by bearing brackets. Springs are calculated for 10,000 door cycles. 25K, 50K. or 100K cycles are optional. Cables are galvanized aircraft quality with a minimum 7 to 1 safety factor.
Insulated Steel Garage Door
Flush Panel
Custom Sizes & Colors Available
Available Colors
Windows Options
Available Options
Pass door
Chain Hoist Operation
Motor operation
Sensing edges
Photo eyes
High cycle spring (25k, 50k, 100k)
3” track option
Solid shafts
Perimeter weather seal
Special track designs
Mullions
INFO
We use the top quality garage doors made from high quality steel. Our garage doors are professionally insulated to reduce heating costs. They are top of the line in the industry as far as flexibility and rigidity go. When you buy a commercial garage door from Local Garage Door Repair, rest assured that you get the best results your money can buy.